Roland ColorChoice Ver. 4.5 - Manual (Page 35)

14. Select the Misc tab and uncheck Use color profile.
For "Output color bitmap as" choose CMYK.
15. After these settings, click Print to print.
Adobe Illustrator® 8.0 [Windows]
The Kodak Color Management System must be installed to output successfully from Illustrator 8 to Roland
ColorChoice Software.
1. From the Roland ColorChoice Print Monitor, click Setup>Setup Properties. Then click the Print tab.
2. Make sure the Perform Color Correction check box has a check in it.
3. In the ICC input profile area, select appropriate CMYK and RGB profiles. If you know which profiles your
application is using, select that profile. If you don’t, use the default settings.
4. For the ICC output profile, select the appropriate ink/media combination. Also select a rendering intent to
use.
5. Click OK in the Setup Properties dialog.
6. In Illustrator, go to File>Document Setup.
7. Select ‘Use printers default screen’.
8. Select ‘Use Print Setup’.
9. Click the Print Setup button. Print Setup screen appears.
10. Select your printer in the Name field.
11. Click the Properties button.
12. Choose a paper size from the ‘Paper’ field or select a Custom page for a custom page size.
13. If you choose a custom page size, you may enter the custom size by clicking the Custom button and
entering the width and height.
14. If you choose custom page, click OK to Custom Defined Size dialog.
15. Click OK in the Properties dialog.
16. Click OK in the Print Setup dialog.
17. Click OK in the Document Setup dialog.
18. If you want your monitor to soft-proof CMYK output, go to File>Color Settings and check ‘Simulate
print colors on display’.
19. Go to File>Print.
20. If not dimmed, set Output to Composite.
21. Set PostScript to Level 3.
22. Check Force Fonts to Download.
23. Click OK to print.
Adobe Illustrator 9.0 [Windows]
The Kodak Color Management System must be installed to output successfully from Illustrator 9.0 to Roland
ColorChoice Software.
1. From the Roland ColorChoice Print Monitor, click Setup>Setup Properties. Then click the Print tab.
2. Make sure the Perform Color Correction checkbox has a check in it. Also, if you're using the
transparency feature of Illustrator 9.0 or the likes (described later in this document), we recommend
setting the same option for "Bitmap rendering intent" and "Vector rendering intent". Color stitching
35