Roland ColorChoice Ver. 4.5 - Manual (Page 7)

Supported Printers
The supported printers are:
Hi-Fi JET PRO FJ-600/500/400
Hi-Fi JET FJ-52/42/50/40
CAMM JET CJ-500/400
SOLJET SC-500, SJ-600/500
Windows 95/98/ME Installation
1. Insert the Roland ColorChoice Installation CD into your CD-ROM drive. The CD Setup window displays.
2. From the CD Setup window, select the language of the installer you would like.
3. Click Next. The Software to Install window displays.
4. Select the language you would like from the Language drop-down box.
5. Click Next. The Welcome window displays.
6. Click Next. The Select Components window displays.
7. Select Typical if you want to install the complete software, Custom if you want to choose the
components to install.
8. Click Next. The Select Program Folder window displays.
9. Select the folder you would like Roland ColorChoice to display in.
10. Click Next. The Choose Destination Location window displays.
11. Select the destination by clicking on Browse or accept the default location.
12. Click Next. After the installation is completed, the Restarting Windows dialog displays.
Note: If you currently have Roland ColorChoice on your system, the Clear Preferences window displays.
Click Yes to delete preference settings on your system.
13. Select Yes and click OK to restart your computer.
Setting Up the Roland ColorChoice
After the computer restart, Roland ColorChoice is automatically launched and you are prompted to select the
output device.
1. Select a printer model.
2. Click Next.
3. Select the port type you would like to use. You may a choose LPT or TCP/IP.
4. Click Finish.
5. Click OK to install the Adobe® PostScript® Driver.
Installing AdobePS Driver for Windows 95/98/ME
1. The Welcome window displays.
2. Click Next. The End User License Agreement window displays.
3. After reading the License agreement, click ACCEPT to accept. The Printer Connection Type window
displays.
4. Select Local Printer and click Next. The Local Port Selection window displays.
7