Roland ColorChoice Ver. 4.5 - Manual (Page 9)

Windows NT 4.0 Installation
This section describes how to install the software on computers running Windows NT 4.0. You must logon
with Administrator privileges to install the software.
1. Insert the Roland ColorChoice Installation CD into your CD-ROM driver. The CD Setup window displays.
2. From the CD Setup window, select the language of the installer you would like.
3. Click Next. The Software to Install window displays.
4. Select the language you would like from the Language drop-down box.
5. Click Next. The Welcome window displays.
6. Click Next. The Select Components window displays.
7. Select Typical if you want to install the complete software, Custom if you want to choose the
components to install.
8. Click Next. The Select Program Folder window displays.
9. Select the folder you would like Roland ColorChoice to display in.
10. Click Next. The Choose Destination Location window displays.
11. Select the destination by clicking on Browse or accept the default location.
12. Click Next. After the installation is completed, the Restarting Windows dialog displays.
Note: If you currently have Roland ColorChoice on your system the Clear Preferences window displays.
Click Yes to delete preference settings on your system.
13. Select Yes and click OK to restart your computer.
Setting Up the Roland ColorChoice
After the computer restart, Roland ColorChoice is automatically launched and you are prompted to select the
output device.
1. Select a printer model.
2. Click Next.
3. Select the port type you would like to use. You may choose LPT or TCP/IP.
4. Click Finish.
5. Click OK to install the Adobe PostScript Driver.
Installing AdobePS Driver for Windows NT 4.0
1. After reading the License Agreement, click Yes to accept. The AdobePS 5 Postscript Printer Driver
Setup window displays.
2. Click Next. The Install Setup Program window displays.
3. Select No and click Next. The Install Printer window displays.
4. Select Local Printer, and then click Next. The Select PPD window displays.
5. The PPD files are located in the ‘C:\Program Files\Roland ColorChoice 4 \PPD’ folder. Select the PPD
according to your printer model.
6. Click Next. The Select Port window displays.
7. Select LPT1 for your local port selection. You may choose any port in this window.
8. Click Next. The Get Shared Information window displays.
9. Select Shared if the printer will be shared on a network and then enter the printer share name.
9