Radio Shack Univer 15-2138 User Manual

Page 27

Advertising
background image

O

WNER

S

M

ANUAL

6. Exit programming by pressing

once. The display will return to the

last-selected device menu screen.

7. To test the power macro, first make sure all home theater devices

selected in step 4 are turned on.Aim the remote control at the
devices and press MY SYSTEM once, followed by PWR once. The
devices should turn off in this order: Satellite Receiver, DVD Player,
Audio Receiver, and TV.

To turn on the devices on again in the same order as above, press
PWR once.

P

ROGRAMMING

T

HE

COM MUTE K

EY

If desired, a two-state rotating macro can be programmed onto the COM
MUTE
key, so a key press will drop volume (in the CBL, SAT, TV, VCR, or
AUX mode) to a preset level during a commercial. When the program
resumes, another key press will raise it back to the original level.

1. Press and hold P until the bottom IR segment flashes twice.

The program keys will appear:

2. Press above MACRO once. The Macro programming screen will appear:

3. Press COM MUTE once. The last-selected device menu screen, including

, will be displayed.

4. Enter the first macro sequence by pressing TV once, then press VOL

four times (to lower the volume four steps).

5. To save the macro, press and hold P until the bottom IR segment

flashes twice. The program keys will appear again.

6. To program the second macro, repeat steps 2 through 5, but substitute

VOL

for VOL

this time (to raise the level four steps).

7. Exit programming by pressing

once. The display will return to the

last-selected device menu screen.

continued on next page...

Using Macros 27

RS 8in1 Kameleon OM rev 10/9/03 4:11 PM Page 27

Advertising