Setting the finder receiver – Radio Shack Univer 15-2138 User Manual

Page 39

Advertising
background image

O

WNER

S

M

ANUAL

SETTING THE FINDER RECEIVER

The RadioShack 8-in-One Remote comes with a Finder Transmitter that
can be used to quickly locate the main remote if it is accidentally lost
or misplaced. At the factory, the Finder Receiver (inside the remote) is
set to wake up every few seconds, listen for a signal from the Finder
Transmitter
, and then emit an audible alert to pinpoint the location of
the main remote. This is a great feature, but it does use extra battery
power.If you do not plan to use the Finder Transmitter, we recommend
turning off the remote’s Finder Receiver to conserve battery life.

D

ISABLING

T

HE

F

INDER

R

ECEIVER

1. Press and hold P until the bottom IR segment flashes twice.

The program keys will appear:

2. Press below OTHER once. The Other programming screen will appear:

3. Using the number keys, enter 9 7 2. The The bottom IR segment

will flash four times, confirming the Finder Receiver is disabled.
The program keys will appear again.

4. Exit programming by pressing

once. The display will return to the

last-selected device menu screen.

E

NABLING

T

HE

F

INDER

R

ECEIVER

1. Perform steps 1 and 2 of the previous section, Disabling The

Finder Receiver.

2. Using the number keys, enter 9 7 2. The The bottom IR segment will

flash twice, confirming the Finder Receiver is enabled. The program
keys will appear again.

3. Exit programming by pressing

once. The display will return to the

last-selected device menu screen.

Setting The Finder Receiver 39

RS 8in1 Kameleon OM rev 10/9/03 4:12 PM Page 39

Advertising