Raypak Latching Lockout Module C-5 User Manual

C-5 latching lockout module

Advertising
background image

C-5 LATCHING

LOCKOUT MODULE

CSD-1 Compliant Local Manual Reset Device

The C-5 Latching Lockout Module (LLM) is a solid state electronic ignition fault detector that
has been engineered to comply with ASME Safety Code CSD-1 requirements for manual
intervention ignition supervision. The C-5 LLM monitors the boiler’s electronic ignition system
and will lockout the ignition system upon flame failure. The boiler will remain safely shut-down
until manually reset by an on-site operator. The LLM prevents a boiler restart due to remote
cycling of the power. The LLM, or equivalent, is required on CSD-1 Code configured boilers.

Features
• Complies with ASME Safety Code CSD-1
• U.S. Postal Service AS-620 Compliant
• Microprocessor Based
• Solid State Circuitry
• Non-Volatile EEPROM Latching Mechanism
• Local Manual Reset
• 100% Shutoff Lockout
• 24V Monitor and Control Voltage
• Power and Fault LEDs
• Quick Connect Electrical Connections
• NEMA 3R Rainproof Enclosure
• Single Source Accountability

Catalog No. 5100.15C

Effective: 12-28-07

Replaces: 03-15-03

Raypak, Inc. reserves the right to make product changes or improvements at any time without notification.

COVER OFF

COVER ON

Advertising