Raymarine Radar equipment Raychart Chartplotter RC530 PLUS - Manual (Page 130)

5-26 hsb 2 PLUS Series Color LCD Display
U
sin
g the
Rou
te Li
st
to
Era
se
an
d Na
m
e a
Ro
ut
e
Figure 5-8: Route Information Window
4. Press ENTER to remove the Route Information window, then ENTER or
CLEAR to return to the route soft keys.
5. To return to the default soft key display, press ENTER.
Using the Route List to Erase and Name a Route
You can delete a route and you can re-name a route by selecting the route on
the route list.
➤ To select a route to delete or re-name:
1. Press the ROUTE soft key, followed by MORE, then press ROUTE LIST. The
route list is displayed. The selection bar indicates the selected route.
Press the appropriate soft key – ERASE ROUTE or NAME ROUTE.
2. If you ERASE a route you are prompted to confirm.
Press NO to cancel the operation, then ENTER or CLEAR if you wish to
remove the route list.
Press YES to erase the route from the list, then ENTER or CLEAR to remove
the route list.
PLANNED SOG
0.0kn
TIME
ETA TOTAL
ACTUAL
SOG
1.0kn
INFO FOR ROUTE-CURRENT ROUTE
WPT POSITION BRG DISTANCE TOTAL TIME
°T nm nm ETA
01 50°21^97N --- 0.0 0.0 --:--
001°15^80W
02 50°21^97N 090 4.4 4.4 --:--
001°08^75W
03 50°27^48N 000 5.5 10.0 --:--
001°08^75W
D4264-1
ROUTE
ERASE
ROUTE