Raymarine Radar equipment Raychart Chartplotter RC530 PLUS - Manual (Page 191)

Chapter 8: Installation 8-13
Di
sp
lay Un
it
C
onn
ect
ion
Display Unit Connection
The rear of the hsb 2 series LCD display provides the following connection
sockets:
• Scanner (antenna) connection
• hsb 2 , in/out connector for connecting to another hsb 2 or HSB series display.
• SeaTalk, for SeaTalk data input and output and connecting to another hsb 2
series display (such as a chartplotteror second radar display).
• NMEA Output, for NMEA data output in an integrated system.
• Power/NMEA Input, for 12 V, 24 V or 32 V DC power connection, two
NMEA 0183 inputs and one RF ground (screen) connection.
Figure 8-6: Radar Display Connector Panel
The following sections detail the display unit connectors used when installing
a single hsb 2 series LCD Display. The remaining connector details are
provided in Section 8.8.
NMEA
OUT
POWER/NMEA TRANSDUCER SeaTalk
HSB
R
G
Y
To NMEA instruments
NMEA IN 2
D5576-1
POWER IN
NMEA IN 1
To other hsb 2 displays
To SeaTalk
instruments/GPS
To radar scanner unit