Raymarine Radar equipment Raychart Chartplotter RC530 PLUS - Manual (Page 30)

1-14 hsb 2 PLUS Series Color LCD Display
C
ha
rtplo
tter Display
Op
ti
on
s
Ch
art
plo
tte
r Di
sp
lay
Opti
on
s
Chartplotter Display Options
In addition to the display set up options previously described, chart set up
options, described in Chapter 7, allow you to customize the chart by selecting:
• What cartographic features and level of detail are displayed.
• Chart orientation (north up, head up or course up), datums and position off-
set.
• How waypoints are displayed (symbols and numbers).
• Vectors for heading, COG and tide.
The Screen Presentation Options, described in Chapter 2 allow you to switch
the Chart Grid On/Off and Custom Chart Details On/Off.
Note: When you turn the display off and on again, the Screen Presentation set-
tings are retained in memory.
Figure 1-3: Typical Chartplotter Display
Custom Chart Details
The chartplotter set up options include a sub-menu to customize the
cartographic features. This menu allows you to switch features On, Off, or
control them using the CUSTOM soft key. The factory default settings for the
Custom chart options are as follows:
Status Bar
Vessel Position
Cursor -
selecting chart object
Cursor position box
Shows the current
cursor position as
either Range/Bearing
or Lat/Long. You can
move this box to your
preferred position on
the screen or turn it off.
Waypoint
Object data box -
for object selected
by cursor
Default soft key labels
These can be turned off: press any soft key to redisplay them.
Different labels are displayed when you press a key.
Depth Area
Chart Range
Chart Boundary
D4275-2