Roland SP-555 - Manual (Page 29)

29
Editing a sample
1. Make sure that [PATTERN SELECT] is extinguished. If it
is lit, press [PATTERN SELECT] to turn it off.
2. Press the pad whose playback region you want to
adjust, making it sound.
If [MARK] is lit, the start point or end point has already been
adjusted. In this case, cancel the start point/end point setting
(p. 28) before you proceed with the steps below.
3. While listening to the sound, press [MARK] at the
timing of the desired start point.
4. Press [MARK] again at the timing of the desired end
point.
If you specify the BPM (tempo) between steps 3 and 4, the end
point will automatically be set to the location of the beat that is
closest to the timing at which you press [MARK] in step 4 (in
units of beats of the BPM value, beginning at the start point).
To specify the BPM, you can either press [TIME/BPM] so the
button is lit and then turn the CTRL 2 knob, or press [TAP
TEMPO] several times.
1. Make sure that [PATTERN SELECT] is extinguished. If it
is lit, press [PATTERN SELECT] to turn it off.
2. Hold down [MARK], and press the pad whose
playback region you want to adjust, making it sound.
3. When the sound begins to play, release [MARK].
4. While the sound plays, press [MARK] at the timing of
the desired end point.
If you press [MARK] to turn off its light while the sound is
playing, the change in the start point and end point will be
cancelled.
1. Make sure that [PATTERN SELECT] is extinguished. If it
is lit, press [PATTERN SELECT] to turn it off.
2. Press the pad whose playback region you want to
adjust, making it sound.
If [MARK] is lit, the start point or end point has already been
adjusted. In this case, cancel the start point/end point setting
(p. 28) before you proceed with the steps below.
3. While listening to the sound, press [MARK] at the
timing of the desired start point.
4. Stop the pad playback.
Adjusting both the start point and end
point
Start sampling
Unwanted Unwanted
Press [MARK] Press [MARK]
This region will sound
Stop sampling
Specified end point
Timing at which
you press [MARK]
Beat Beat Beat Beat
Adjusted
Start point
Adjusting only the end point
Adjusting only the start point
SP-555_e.book 29 ページ ２００７年６月２５日 月曜日 午前９時９分