Roland SP-555 - Manual (Page 49)

49
About CompactFlash
Here’s how to delete a set of backup data (containing all the
SP-555’s settings including sample banks and pattern banks)
from the CompactFlash card.
1. While holding down [DEL], press one of the BANK [C/
G]–[F/J] buttons.
The display will indicate “bdL,” and the pads to which
backup data has been saved will blink.
2. Press a pad to specify the backup data you want to
delete.
The selected pad will light, and the other pads will go
out.
[DEL] will blink.
You can’t select a pad that is unlit in step 1 (i.e., a pad in
which no data has been saved).
If you decide to cancel, press [CANCEL].
3. Press [DEL].
[DEL] will light, and the backup delete operation will be
executed. During execution, the dot in the display will
blink. When the blinking stops, the backup delete
operation has been completed.
Never turn off the power while the dot is blinking. Doing so
may destroy the backup data or the CompactFlash card.
Deleting backup data (backup
delete)
SP-555_e.book 49 ページ ２００７年６月２５日 月曜日 午前９時９分