Robertshaw 9620 - Manual

Important Safety Information
WARNING:
• Always turn off power at the main power source by unscrewing
fuse or switching circuit breaker to the off position before installing,
removing, cleaning, or servicing thermostat.
• Read all of the information in this manual before installing or
programming this thermostat.
• This is a 24V AC low voltage thermostat. Do not install on voltages
higher than 30V AC.
• All wiring must conform to local and national building and electrical
codes and ordinances.
• Do not short (jumper) across terminals on the gas valve or at the
system control to test installation. This will damage the thermostat
and void the warranty.
1
110-732E
7 Day Programmable
2 Heat / 2 Cool
W
A R R A N T Y
I N T E G R A T E D C O M F O R T S O L U T I O N S ™
DIGITAL
PROGRAMMABLE
THERMOSTAT
9620
User’s Manual
Quick Start
Installation and
Programming
®
HEAT PUMP
H
©2001 Maple Chase Company
As an E
NERGY
S
TAR
® partner, Maple Chase has
determined that this thermostat product meets
the E
NERGY
S
TAR
® guidelines for energy efficiency.
!