Radio Shack Enercell 273-316 User Manual

Cautions, Fcc information, Limited warranty

Advertising
background image

TM

M

T

3 / 4.5 / 6 / 7.5 / 9 / 12VDC • 1A

AC-to-DC Power Adapter

273-316

Cautions:

If this adapter is not compatible with the voltage and

current requirements of your portable device, it can result

in PERMANENT DAMAGE to the device.

Before using, consult the User’s Guide or the rating label

on your device to make sure it requires 3 / 4.5 / 6 / 7.5 / 9 or

12 volts DC.

The power adapter’s current (1A) must be equal to or more

than the current needed by your portable device.

Before charging cell phones, make sure the cell phone

specifications are supported by this power adapter.

Never operate the adapter if it has been damaged in any

way. Do not disassemble it.

w

WARNING: To prevent fire or shock hazard, do not expose the

adapter to rain or other moisture.

w

CAUTION: The total combined current for accessories

plugged into this adapter must not exceed 1A.

FCC Information

This equipment has been tested and found to comply with the limits for a Class

B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed

to provide reasonable protection against harmful interference in a residential

installation. This equipment generates, uses and can radiate radio frequency

energy and, if not installed and used in accordance with the instructions, may

cause harmful interference to radio communications. However, there is no

guarantee that interference will not occur in a particular installation. If this equip�

ment does cause harmful interference to radio or television reception, which can

be determined by turning the equipment off and on, the user is encouraged to

try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.

• Increase the separation between the equipment and receiver.

• Connect the equipment into an outlet on a circuit different from that to which

the receiver is connected.

• Consult the dealer or an experienced radio/TV technician for help.
This device complies with part 15 of the FCC Rules. Operation is subject to the

following two conditions: (1) This device may not cause harmful interference, and

(2) this device must accept any interference received, including interference that

may cause undesired operation.
Modifying or tampering with your 3 / 4.5 / 6 / 7.5 / 9 or 12VDC 1A AC�to�DC

3 / 4.5 / 6 / 7.5 / 9 or 12VDC 1A AC�to�DC

VDC 1A AC�to�DC

Power Adapter’s internal components can cause a malfunction, which might

invalidate its warranty and void your FCC authorization to operate it.

Limited Warranty

Ignition L.P. warrants this product against defects in materials and workmanship

under normal use by the original purchaser for ninety (90) days after the date of

purchase. IGNITION L.P. MAKES NO OTHER EXPRESS WARRANTIES.
This warranty does not cover: (a) damage or failure caused by or attributable

to abuse, misuse, failure to follow instructions, improper installation or mainte�

nance, alteration, accident, Acts of God (such as floods or lightning), or excess

voltage or current; (b) improper or incorrectly performed repairs by persons who

are not a Ignition L.P. Authorized Service Facility; (c) consumables such as fuses

or batteries; (d) ordinary wear and tear or cosmetic damage; (e) transportation,

shipping or insurance costs; (f) costs of product removal, installation, set�up

service, adjustment or reinstallation; and (g) claims by persons other than the

original purchaser.
Should a problem occur that is covered by this warranty, take the product and

the sales receipt as proof of purchase date to the place of purchase. Ignition

L.P. will, at its option, unless otherwise provided by law: (a) repair the product

without charge for parts and labor; (b) replace the product with the same or a

comparable product; or (c) refund the purchase price. All replaced parts and prod�

ucts, and products on which a refund is made, become the property of Ignition

L.P. New or reconditioned parts and products may be used in the performance

of warranty service. Repaired or replaced parts and products are warranted for

the remainder of the original warranty period. You will be charged for repair or

replacement of the product made after the expiration of the warranty period.
IGNITION L.P. EXPRESSLY DISCLAIMS ALL WARRANTIES AND CONDITIONS

NOT STATED IN THIS LIMITED WARRANTY. ANY IMPLIED WARRANTIES

THAT MAY BE IMPOSED BY LAW, INCLUDING THE IMPLIED WARRANTY

OF MERCHANTABILITY AND, IF APPLICABLE, THE IMPLIED WARRANTY OF

FITNESS FOR A PARTICULAR PURPOSE, SHALL EXPIRE ON THE EXPIRATION

OF THE STATED WARRANTY PERIOD.
EXCEPT AS DESCRIBED ABOVE, IGNITION L.P. SHALL HAVE NO LIABILITY

OR RESPONSIBILITY TO THE PURCHASER OF THE PRODUCT OR ANY

OTHER PERSON OR ENTITY WITH RESPECT TO ANY LIABILITY, LOSS OR

DAMAGE CAUSED DIRECTLY OR INDIRECTLY BY USE OR PERFORMANCE

OF THE PRODUCT OR ARISING OUT OF ANY BREACH OF THIS WARRANTY,

INCLUDING, BUT NOT LIMITED TO, ANY DAMAGES RESULTING FROM

INCONVENIENCE AND ANY LOSS OF TIME, DATA, PROPERTY, REVENUE, OR

PROFIT AND ANY INDIRECT, SPECIAL, INCIDENTAL, OR CONSEQUENTIAL

DAMAGES, EVEN IF IGNITION L.P. HAS BEEN ADVISED OF THE POSSIBILITY

OF SUCH DAMAGES.
Some States do not allow limitations on how long an implied warranty lasts or

the exclusion or limitation of incidental or consequential damages, so the above

limitations or exclusions may not apply to you. This warranty gives you specific

legal rights, and you may also have other rights which vary from State to State.

You may contact Ignition L.P. at:

Ignition L.P., 3102 Maple Ave Suite 450, Dallas, TX 75201

02/09

For product support, call 1-866-315-0426.

UsingYour Adapter

1. Plug the correct

size Adaptaplug

onto the jack at the

end of the adapter’s

cord.

If your device’s DC input jack is marked

, align TIP on the adapter’s jack with + on

the Adaptaplug (shown).

If the DC input jack is marked

, align TIP on

the adapter’s jack with on the Adaptaplug.

w

CAUTION: Be sure to set the correct tip polarity.

Incorrect polarity can damage your device or the

adapter.

2. Plug the Adaptaplug into your device’s DC input jack.

3. Set the adapter’s voltage switch to the correct

setting.

4. Plug the adapter into an easily accessible power

outlet located near the equipment.

Protect the environment. Go to E�CyclingCentral.com

to find an electronic recycling center near you.

Printed

in China

05A09

273�316

© 2009. Ignition L.P. All rights reserved.

Enercell is a trademark used by Ignition L.P.

Advertising