Indicators, Power saving function, Indicators power saving function – Canon IXUS 60 User Manual

Page 24: P. 22)

Advertising
background image

22

The camera indicators light or flash under the following
circumstances.

Upper Indicator

Green:

Ready to shoot

Blinking Green:

Image recording/reading/erasing/transferring
(when connected to a computer)

Orange:

Ready to shoot (flash on)

Blinking Orange: Ready to shoot (camera shake warning)

Lower Indicator

Yellow:

Macro mode/infinity mode/AF lock mode

Blinking Yellow:

Focusing difficulty (camera beeps once)

This camera is equipped with a power saving function. The power
will shut off in the following circumstances. Press the power button
again to restore power.

* This time can be changed.

The power saving function will not activate during a slide
show or while the camera is connected to a computer.
The power saving function settings can be changed

(p. 29)

.

Indicators

Never do the following while a green indicator is flashing.
These actions may corrupt image data.
- Shake or jolt the camera
- Shut off the power, or open the memory card slot/battery

cover

Power Saving Function

Shooting Mode

Powers down approximately 3 minutes after the last
control is accessed on the camera. The LCD monitor
automatically turns off 1 minute* after the last control is
accessed even if [Auto Power Down] is set to [Off].
Press any button other than the power button or change
the camera orientation to turn the LCD monitor back on.

Playback Mode
Connected to a Printer

Powers down approximately 5 minutes after the last
control is accessed on the camera.

Advertising