Oki MC860 MFP - Manual (Page 16)

16 • English
Walk-up Operation
Fax (cont.)
Manual Feed Faxing
If you need to send multiple sets
of documents from the ADF or
manual scanner glass:
1. Load the document (see pages
6 and 7).
2. Press the F
AX
button to bring
up the Fax Ready screen.
3. Press Others on the screen,
then press Cont. Scan .
4. Select ON and press Enter .
5. Press Close to return to the Fax
Ready screen.
6. Use the touch screen to set
send properties as required.
7. Enter the fax destination(s) as
described in the box to the
right.
8. Press the M
ONO
button to start
scanning.
9. Once the current scanning
operation is complete, “Set
next document” appears.
a. To scan in additional
documents, press Scan next
page .
b. If you are done scanning,
press Start sending .
Broadcast Faxing
You can send a fax to multiple
locations at the same time. By
combining abbreviation dials,
groups and using the numeric
keypad, you can specify up to
530 destinations.
1. Load the document (see pages
6 and 7).
2. Press the F AX button.
3. Enter the destination fax
numbers:
4. Use the touch screen to set any
desired parameters (e.g.,
delayed transmission time).
5. Press the M ONO
button.
• Use the numeric keypad (up
to 30 numbers can be
entered this way), then press
Enter, or
• select numbers from the
speed dial list, or
• press Others on the touch
screen, then press Group Tx
and select from the group
list.