Oki MC860 MFP - Manual (Page 4)

4 • English
English
Walk-up Operation
General Information
These instructions assume that
all necessary configurable
parameters and profiles have
been set up and, where
applicable, password-protected
by your System Administrator. If
you have any questions, consult
your System Administrator.
1. If you do not have a System
Administrator, see the SetUp
Guide supplied with your
system or consult the on-line
User’s Guide provided on the
CD supplied with the system
for more information.
Available Walk-up
Options
• Copy (see page 8)
• Fax (see page 14)
• Scan (see page 10)
Access Control
If your Administrator has enabled
access control on your machine,
it will automatically start up in
access control mode.
If the PIN screen is
displayed
1. Press PIN No. and use the
numeric keys to enter your
PIN.
2. Press Enter .
3. Press Log in .
If the User/Password
screen is displayed
1. Press User Name and use the
touch screen keyboard to enter
your user name.
1. Press Enter to confirm.
1. Press Password and use the
touch screen keyboard to enter
your password.
1. Press Enter to confirm.
1. Press Log in .
Logging Out
When you have finished using the
unit, select
Others > Logout to
return to the access control
screen.