About your kameleon 5 – One for All KAMELEON 5 User Manual

Page 3

Advertising
background image

2

WWW.ONEFORALL.COM

About Your KAMELEON 5

Easy to use unique “EL” display
By choosing the ONE FOR ALL KAMELEON 5 universal remote control you have
opted for easy use. Your KAMELEON 5 features a unique, user-friendly backlit
display, which ensures you have easy access to all the keys you need, whilst
hiding those you don’t. Made of the strictest quality, it will provide long-term
satisfaction. When inserting the batteries the KAMELEON 5 will be in “demo-
mode” and show several screens. The “demo mode” will be cancelled by setting
up your remote (press and hold MAGIC for about 3 seconds then press and
release ESC) .
After replacing batteries, you will need to first press any key before the screen
will light up. From then on, the display will automatically illuminate
whenever the remote is picked up (touching screen and remote simultaneously).
It is also possible to change the activation-mode into activation by key press. To
set the ”EL” display to activation by key press, see page 4, section: ”EL” screen
activation setting.

Controls up to 5 devices
Your KAMELEON 5 is designed to let you use one remote to operate your Video
and Audio equipment; any device designed to be operated by an infrared signal.
Your KAMELEON 5 comes with 2 IR (infra-red) wide range transmitters for
maximum range and is High Frequency capable up to 450 kHz. You can choose
any combination of 8 devices you would like to operate.

TV

Television / LCD / Plasma / Projector / Rear Projector

DVD

DVD Player / DVD-R / DVD Home Cinema / DVD Combi / DVD/HDD /
Laser Disc Player, Video Cassette Recorder / TV/VCR Combi / DVD/VCR
Combi / Cassette Player (Tape Deck) / Digital Audio Tape / DCC

SAT

Satellite Receiver, Cable Converter, DSS / Video Accessory
(e.g. Media Centres), Personal Video Recorder, Hard Disc Recorder

AUD

Audio / Audio Receiver/Tuner/Amplifier / (DVD) Home Cinema

LIGHT

IR controlled light switches - The KAMELEON 5 also features a
“LIGHT” mode, for control of power modules used in Light Control™
Dedicated addressable 433.92 MHz protocol. This mode will send out
InfraRed (IR) commands to a separately available “ONE FOR ALL Light
Control™ Starters Kit - HC-8300”, which will convert the IR com-
mands in RadioFrequency (RF) to be received by power modules for
dimming and switching lights.

To enable Light Control™ on your KAMELEON 5 you must
purchase the „ONE FOR ALL Light Control™ Starters kit -
HC-8300“.

Kameleon_5_Euro_10_TALEN:Kameleon_5_nieuw_2006_Euro 12-03-2007 16:22 Pagina 2

Advertising