Omron V600-HA User Manual

Ordering information/specifications, Intelligent flag i/ii, Amplifier

Advertising
background image

2

Intelligent Flag I/II

V600-HA

Intelligent Flag I/II

V600-HA

Innovative RFID Electronic Flags to
Replace Mechanical Flag and Kanban
Systems

• Doesn't need a program and can be used like a sensor.

• Advanced line construction at minimal cost.

• Saves space.

• Precise installation not required (Transmission distance:

100 mm max.).

• A verification function provided on multi-functional type.

• Addition of 16-bit models to the series responds to applica-

tions from Kanban to quality control.

• Equipped with a wiring reduction mode and communications

parity check function (16-bit models).

• Both NPN and PNP output available.

• FCC certified.

Ordering Information/Specifications

Amplifier

Type

Read-only (8-bit)

Multi-functional (8-bit)

Read-only (16-bit)

Item Model

V600-HAR91

V600-HAR81

V600-HAM91

V600-HAM81

V600-HAR92

Power supply

24 VDC ±10%, ripple (p-p): 10%

Current consumption 130 mA max.

Input

Transistor output or contact output
Short-circuit current: 3 mA (typical) (IN terminal and 0-V short-circuit)
OFF voltage:

15 to 30 VDC

ON voltage:

0 to 5 VDC

Input impedance:

8.2 k

Applied voltage:

30 VDC max.

Transistor output
OFF voltage:
15 to 30 VDC
Input impedance:
8.2 k

Short-circuit current:
3 mA (typical) (for 0-V short-circuit of
INHIBIT/TRG)
ON voltage:
0 to 5 VDC
Applied voltage:
30 VDC max.

Output

NPN open collector
output, 20 mA max. at
30 VDC, residual volt-
age: 2 V max.

PNP open collector
output, 20 mA max.
at 30 VDC, residual
voltage: 2 V max.

NPN open collector
output, 20 mA max. at
30 VDC, residual volt-
age: 2 V max.

PNP open collector out-
put, 20 mA max. at 30
VDC, residual voltage: 2 V
max.

NPN open collector output, 20 mA
max. at 30 VDC, residual voltage: 2 V
max.

Diagnostic functions Checks for CPU errors and transmission errors

Insulation resistance 50 M

Ω max. (at 500 VDC) between cable terminals and case

Dielectric strength

500 VAC, 50/60 Hz for 1 min between cable terminals and case (leakage current: 1 mA max.)

Advertising