Olympus 2000 - Manual (Page 33)

33
Tools Menu
Detect Device
Updates the information about devices that cannot be automatically detected. If a new
device is detected, it is shown in the Device TreeView.
Rename DS-2000 Folder
You can rename the folder names of Folder A, B, and C in the DS-2000 Folder. The folder
name can be 8 characters long and spaces can be used.
However, the following characters are not allowed:
# $ ' @ [ ] \ ~ | ^ { }
Edit Comments
Edit the comments in a DSS file. You can enter up to 100 characters for the comment.
Play
Plays the current active voice file in the Dictation ListView on your PC. The playback start
position in this case is the current display position of the Position Control on the play bar. When the
end of the file (right end of the play bar) is reached, playback automatically stops. The Position
Control either rewinds or remains at the last position on the play bar until the next time playback is
executed. If you execute the playback command when the Position Control is at the end of the file,
the playback starts from the beginning of the file.
The playback of the files in the DS-150 are carried out on the DS-150, and the playback always
starts from the beginning of the file.
Stop
Stops playback, fast forward, or rewind.
Fast Forward
Fast-forwards the file.
Rewind
Rewinds the file.
Intro Scan
You can play the initial five seconds of the files in the selected folder. Scanning starts from
the first file and continues until all the DSS files in the selected folder are played. When all DSS
files have been scanned, a Beep is heard. For DSS files that are less than five seconds long, the
file is played to the end and the scanning continues to the next DSS file.
When the files in the selected folder are scanned, the DSS file that is being played is highlighted.
If you interrupt the scanning operation by stopping or changing the playback position, the scanning
stops at that point and the current file becomes the active file. In addition, if you execute scanning
while scanning is in progress, the operation is aborted and the current file is played until the end of
the file or until it is stopped.
OLE Setting
With this command, you can select whether the OLE Drag & Drop function embeds the object
(Embedded) or links the object (Linked). By placing a check mark on the desired operation, the
process that the application will use will be specified.