Sylvania SC11 - Manual

SYLVANIA Emergency Lighting
Installation Instructions
Installation Instructions for Emergency Lights
Model SC36, SC11
SAVE THESE INSTRUCTIONS
• Before Installation, read instructions and understand all safety information.
WHEN INSTALLING AND USING ELECTRICAL EQUIPMENT, ALL WORK SHOULD BE PERFORMED BY A LICENSED
ELECTRICIAN AND BASIC SAFETY PRECAUTIONS SHOULD ALWAYS BE OBSERVED INCLUDING BUT NOT LIMITED TO
THE FOLLOWING:
• To prevent shock or damage, turn power off before inspection, installation or removal.
• The use of accessory equipment is not recommended and may cause an unsafe condition.
• Do not use this electrical equipment for other than its specific intended purpose.
• This unit has been supplied with specified lamps. To avoid malfunction, use only lamps specified
by manufacturer.
• To avoid risk of fire, do not store or place flammable materials near lamp.
• Use caution when changing or inspecting lamps as they can become hot and may cause burns if
handled improperly.
• To avoid electrocution or property damage, do not install or use where exposed directly to water or
outdoor weather conditions.
• This product contains a chemical known to the state of California to cause cancer, birth defects or other
reproductive harm.
WARNING
INSTALLATION
Step 1:
Remove dust cover from unit by applying gentle, even pressure around edges. If you are installing the light during a
building construction phase, please save dust cover for reinstallation to protect the unit prior to the final connection
by electrician.