Oregon Chamfer Chisel 91P F&B A107038 - Manual

91P LOW-PROFILE 3/8”-PITCH
CHAMFER CHISEL
™
CHAIN
Oregon ® 91P chain features top-performing Chamfer Chisel™ cutters and a notched bumper
drive link for low-kickback performance, good chip flow, and a smooth cutting action. The twin
corners of the cutters on 91P chain deliver superior performance on the many popular saws
which use low-profile 3/8”-pitch chain. 91P chain also features four-way symmetrical tie straps
which simplifies the joining of chain loops.
FEATURES BENEFITS FEATURES BENEFITS
91P F&B A107038 AA 0903
.050”
• Twin-cornered • Fast, efficient cutting
Chamfer Chisel
™
• Excellent stay-sharp
cutters
• Ramped depth gauge, and • Low kickback
ramped bumper drive links • Smooth cutting action
• Bumper drive links are notched • Better chip flow, less clogging
(Patent pending) • Unique appearance, easy identification
• A promotable, innovative new feature
• Four-way symmetrical tie straps • Easy joining of chain loops
• Fewer repair parts to inventory
• Fool-proof, there’s no way to position
a 91P tie strap incorrectly
• Same cutter as on other • Easy maintenance
Oregon
® 91 chains • Sharpens the same as other 91 chains
• Low-profile design • Complements the effects of
kickback-reducing features
• A smaller volume of chain material
is pulled through the kerf
Oregon ® 91P chain is
a blue-label chain; it
meets the low-kick-
back performance
requirements of ANSI
B175.1 (US), and
CSA Z62 (Canada)
91P is intended for use with electric
saws and smaller gasoline-powered
saws up to 2.5 cu. in. (41cc)
Use 91P with bars up to 18” (46cm)
3/8”
low profile
• Ramp-shaped Bumper
Depth Gauges
• Notched Bumper
Drive Links
Occasional Users
Homeowners,
campers and hunters
CHAIN PITCH AND GAUGE
KICKBACK – ANSI CLASSIFICATION
RECOMMENDED TYPES OF USE
RECOMMENDED SAW SIZES
RECOMMENDED BAR LENGTHS
KICKBACK-REDUCING FEATURES
PITCH
GAUGE
.
Visit the world’s #1 source for information on chainsaw cutting attachments: www.oregonchain.com
® Choose Oregon , because every cut counts ® ® Choose Oregon , because every cut counts
91P is a standard-sequence chain
CUTTER SEQUENCE
Oregon ® 91P
chain features
twin-cornered
Chamfer Chisel
™
cutters
.
Commercial Users
Arborists, orchardists,
farmers, landscapers,
and utility workers
91P LOW-PROFILE 3/8”-PITCH
CHAMFER CHISEL
™
CHAIN