On-Q/Legrand REV.O 1307877 - Manual (Page 13)

Page 9
301 Fulling Mill Road, Suite G ©Copyright 2005 by On-Q/Legrand, Inc All Rights Reserved.
Middletown, PA 17057 www.onqlegrand.com
(800)-321-2343
A. Configuring a Windows XP Ethernet Network Interface Card to talk to the WAP
This section includes information on configuring computers with the Windows XP operating
system (differences for 98SE, ME and 2000 will be sited).
NOTE: This configuration assumes you have retained the default interface for Windows
XP. If you are running the .Classic. interface, please note any sited differences for
Windows 2000.
1. Click Start.
2. Select Control Panel.
(For Windows 98SE, ME and 2000, select Settings first)
3. Double-click Network and Dial-Up Connections.
(Double Click Network for Windows 98SE and ME and the Network Window is
displayed)
4. Double-click Local Area Connection. The Local Area Connection Status window appears
(see Figure 12).
(Step 5 is not applicable for Windows 98SE or ME)
Figure 12