Jp en de fr es se ru nl it ck ch kr, Vibration reduction mode (vr – Nikon 200-400mm f 4G ED AF-S VR II Zoom-Nikkor User Manual

Page 23

Advertising
background image

23

Jp
En

De
Fr
Es
Se
Ru
Nl
It
Ck
Ch
Kr

En-01
R145_En_00_23 2010/01/25 19:50

be taken when performing memory recall at longer focal length settings.

When the sound monitor switch is set to , it will beep a warning. It is

recommended to perform memory recall as often as possible at the same

focal length to which the memory has been set.

2

Set the focus operation selection switch to MEMORY RECALL.

3

Press a focus operation button. After the lens beeps twice, fully press the

shutter release button to take the picture.

• The saved focus distance is recalled when a focus operation button is pressed

even when the shutter release button is pressed halfway.

• To take pictures at the saved focus distance, hold the focus operation button

down and fully press the shutter release button.

• The lens reverts from memory recall to autofocus or manual focus when the

focus operation button is released.

Autofocus (AF) start on the lens (AF-ON)

1

Set the focus mode switch to A/M or M/A.

2

Set the focus operation selection switch to AF-ON.

3

Press a focus operation button to take pictures.

• Autofocus is activated while a focus operation button is pressed and held down.

• The AF-ON function can be engaged either from the camera or from the lens.

Vibration reduction mode (VR

)

Basic concept of vibration reduction

Strength of vibrations

Strong

Weak

Set the vibration reduction

mode switch to NORMAL.

Panning shots

Camera shake

Vibration reduction using a tripod

Set the vibration reduction

mode switch to ACTIVE.

Number of vibr

ations

Low

High

Strong

camera shake when

taking pictures

from a moving

vehicle

When taking pictures
When taking panning shots
When taking pictures from

a moving vehicle
When taking pictures using

a tripod

Set the vibration reduction mode switch to either NORMAL or ACTIVE.
Set the vibration reduction mode switch to NORMAL.

Set the vibration reduction mode switch to ACTIVE.

Set the vibration reduction mode switch to either NORMAL or ACTIVE.

Advertising