Nikon 200-400mm f 4G ED AF-S VR II Zoom-Nikkor - Manual (Page 26)

26
Jp
En
De
Fr
Es
Se
Ru
Nl
It
Ck
Ch
Kr
En-01
R145_En_00_26 2010/01/25 19:50
■ Lens protective glass
This lens is available with a lens protective glass
attached. Keeping this glass on the lens is recommended
at all times.
• If the picture you want to take includes a bright light
source, removing this glass may reduce ghost images.
To detach the glass, unscrew by rotating the rubber
ring around the glass (1, 2).
• Store the glass in the dedicated lens protective glass
case provided.
■
The built-in flash and vignetting
To prevent vignetting, do not use the lens hood.
Cameras Supported focal length/Shooting distance
D90, D80, D50
• 200mm/3 m (9.8 ft.) or greater
• 250mm or longer/No restriction
D70-Series
• 200mm/4 m (13.1 ft.) or greater
• 250mm/2.5 m (8.2 ft.) or greater
• 300mm or longer/No restriction
D5000, D3000, D60, D40-Series
• 200mm/5 m (16.4 ft.) or greater
• 250mm/3 m (9.8 ft.) or greater
• 300mm/2.5 m (8.2 ft.) or greater
• 350mm or longer/No restriction
F80-Series/N80-Series*
• 200mm/3 m (9.8 ft.) or greater
• 250mm or 300mm/2.5 m (8.2 ft.) or greater
• 350mm or longer/No restriction
F75-Series/N75-Series*, F70-Series/N70*
• 250mm/5 m (16.4 ft.) or greater
• 300mm/4 m (13.1 ft.) or greater
• 350mm/3 m (9.8 ft.) or greater
• 400mm/No restriction
F65-Series/N65-Series*, F60-Series/N60*,
F55-Series/N55-Series*, F50-Series/N50*,
F-401/N4004*, F-401x/N5005*, F-401s/
N4004s*, Pronea 600i/6i*, Pronea S
Vignetting occurs at any shooting distance.
*Sold exclusively in the USA
■ Slip-in filter holder
Always use a (52mm screw-on) filter. A 52mm Screw-on NC Filter is attached to
the filter holder when shipped from the factory.
1
Press down on the slip-in filter holder knob, and turn
counterclockwise until the white line on the knob is at
a right angle to the axis of the lens.
2 Pull the slip-in filter holder from the lens body
3 Detach the attached filter from the filter holder.
4 Screw a filter onto the side of the filter holder marked
with the words “Nikon” and “JAPAN”.
• The slip-in filter holder can be attached with the
“Nikon” and “JAPAN” facing either the lens or camera
side without any effect on your pictures.