Oregon Scientific RMR603HGA User Manual

Page 11

Advertising
background image

EN

10

ACTIVATE ALARM

Press

((.))

to activate or deactivate the Alarm.

shows

in the Clock Area when the Alarm is activated.

SNOOZE ALARM

Press SNOOZE/LIGHT to silence the Alarm for
8 minutes.

If no button is pressed, the Alarm will automatically
silence after 2 minutes. It will then sound again after
8 minutes.

TEMPERATURE AND HUMIDITY

This product can display the following temperature and
humidity information:

• Current, minimum and maximum readings

• Trend line

Data is collected by the remote sensors and displayed
every 40 seconds.

SELECT TEMPERATURE UNIT

Slide the

°

C /

°

F switch into the desired location. The

switch is located in the battery compartment. The setting
for the main unit overrides the remote sensor setting.

SELECT SENSOR CHANNEL

Press CHANNEL to switch between sensors 1 - 3.

The icon shows the selected sensor.

To auto-scan between sensors, press and hold
CHANNEL for 2 seconds. Each sensor's data will be
displayed for 3 seconds. To end auto-scan, press
CHANNEL or MEM.

Indoor

Display

Designat-
ed
Display

Remote

Display

Channel 1

Kinetic-
wave
Icon

Remote

Display

Channel 2

Remote

Display

Channel 3

RMR603HGA lab test R2

1/17/04, 4:52 PM

10

Advertising