One for All URC3050 - Manual

Features and Functions
The illustration below and chart on the next page describe the
features and functions of the One For All® So Easy 3 Device
universal remote control.
Feature Function
The LED flashes red to show that the
remote is working.
The TV, VCR and CBL keys are used to
select the home
entertainment device you want to control.
The POWER key operates the same as on
your original remote.
The SETUP key is used to set up your
devices.
The Glow Keys: VOL (Volume), CH
(Channel), and M (Mute) operate the same
as on your original remote. To activate the
"Glow" Feature, you must expose the
Glow Keys to bright light. The length of
time the Glow Keys remain illuminated
will be determined by the length of time
the remote is exposed to bright light.
These keys are also used to enter set-up
codes for your devices.
The REW (Rewind), FF (Fast Forward),
STOP, PLAY, PAUSE and REC (Record)
keys control the same functions as those
found on your VCR remote.
Overview:
RED Light (LED)
Thank you for purchasing the One For All® So Easy 3 Device
universal remote. Before you can use your new
remote, you will need to program it. To do this, you need to tell
the remote what equipment you wish to operate. This is done by
following these three easy steps.
Step 1: Install two (2) new AAA alkaline batteries.
Step 2: Look up the code for your TV, VCR or Cable
Box.
Step 3: Enter the code.
URC 3050
So Easy 3