Onkyo DX-7222 - Manual (Page 8)

8
Playing CDs
DX-7222
PLAY
DISPLAY
PHONES LEVEL PHONES
, / /
REMOTE CONTROLLER RC-402C
PEAK SEARCH
+10 0 TIME EDIT
CLEAR
MEMORY
REPEAT
DISPLAY
7 8
4 5
1 2
9
6
3
NEXT
SELECTION
A B SHUFFLE
DISPLAY
1 – 9, 0, +10
,
,
•
Plug the headphones with a standard binaural (stereo) plug into
the PHONES jack, and then adjust the sound level using the
PHONES LEVEL knob.
•
Turn the knob clockwise to increase the sound level; turn it
counterclockwise to decrease the sound level.
Press the DISPLAY button during play to switch the time display
among the following three modes:
TOTAL REMAIN: Shows how much playing time is left for
the entire disc.
SINGLE ELAPSED: Shows how long the current track has
been playing.
SINGLE REMAIN: Shows how much time is left for the
track currently playing.
Hold down the / or / button during play.
Release your finger when the music you would like to listen to is
reached. The music will start playing from that point.
1. Each time the / button (or the button on the remote
controller) is pressed, the pickup will advance one track; and
each time the
/ button (or the button on the
remote controller) is pressed, the pickup will go back one track.
Press these buttons until the desired track number is selected.
2. Press the button to begin play.
When the / button (or the button on the remote
controller) is pressed once while playing, the pickup will return
to the beginning of the current track and play it.
1. Select the track number you wish to play, using the number
buttons and the +10 button.
2. The CD player starts playing automatically.
Listening with the headphones
DISPLAY button
Search play
Skip play
Starting play from a given track
(Remote controller only)
a
b
c
DX-7222
SINGLE REMAIN
SINGLE ELAPSED
TOTAL REMAIN
DX-7222
DISPLAY
Remote controller
Remote controller
Remote controller
Remote controller
+10 0
7 8
4 5
1 2
9
6
3
Remote controller