2-3 other remote networks, Other remote networks, Sysmac support software or cv support software – Omron CQM1H-CLK21 User Manual

Page 261

Advertising
background image

238

Remote Programming and Monitoring

Section 7-2

CX-Programmer

A CX-Programmer connected to a CS/CJ-series, C200HX/HG/HE, CVM1,
CV-series, or CQM1H-series CPU Unit can program and monitor any other
PLC on another Controller Link Network. Other types of PLC, different to the
one to which the CX-Programmer is connected can also be programmed or
monitored on remote networks.

Note

1.

Version 1.20 of CX-Programmer must be used for the CQM1H-series Con-
troller Link Unit.

2.

Use CX-Programmer version 2.04 or higher for a CJ-series Controller Link
Unit.

7-2-3

Other Remote Networks

SYSMAC Support Software or CV Support Software

A Programming Device connected to a CVM1 or CV-series CPU Unit can pro-
gram and monitor a CVM1 or CV-series PLC on a different type of network
(SYSMAC NET or SYSMAC LINK) through a CVM1 or CV-series PLC. Other
types of PLC cannot be programmed or monitored on remote networks.

Note Remote programming and monitoring is possible from computer nodes.

Controller Link Network

Controller Link Network

CX-Programmer

Programming Device

Controller Link Network

Controller Link Network

Programming
and monitoring

CS/CJ-series, C200HX/HG/
HE, CVM1, CV-series, or
CQM1H-series PLC

Controller Link
Support Software

CS/CJ-series,
CVM1, or CV-
series PLC

CX-Programmer

CS1-series PLC

CVM1 or
CV-series PLC

CS/CJ-series, C200HX/HG/
HE, CVM1, CV-series, or
CQM1H-series PLC

Controller Link Network

Controller Link Network

Controller Link Network

SYSMAC Support
Software (CVM1 Only)
or
CV Support Software

Programming Device

Programming
and monitoring

CVM1 or CV-series PLC

CVM1 or CV-series PLC

CVM1 or CV-series PLC

Controller Link
Support Software

CVM1 or CV-
series PLC

SYSMAC NET

Remote programming and monitoring is not possible from computer nodes.
Computer nodes can only monitor Controller Link Network status.
A Programming Device connected to a C200HX/HG/HE PLC cannot remotely
program or monitor a node on a remote network.

Note

Advertising
This manual is related to the following products: