Setting password, To set screen light – Toshiba e350 User Manual

Page 45

Advertising
background image

Basic Skills

User's Manual

2-27

TOSHIBA Pocket PC e350

Version

1

Last Saved on 04/03/2003 13:38

ENGLISH using Euro_C.dot –– Printed on 04/03/2003 as e350_UK

Setting Password

You can protect data or settings from a third person by setting a
password which is requested when turning power on.

1

Tap

and then Settings. On the Personal tab, tap Password.

2

Select the type of password you would like to use.

3

Enter a password and tap OK.

4

Tap YES on the confirmation screen. The password is saved and the
screen returns to the Personal tab screen

If you tab YES on the confirmation screen to return to the Personal tab
screen, it becomes necessary to enter the password even for displaying
the Password setting screen.
In case you forget the password, it is necessary to initialise the Pocket PC.
Please note that when initialisation is executed, data or settings stored in
the Pocket PC are all deleted.

To Set Screen light

You can set the screen brightness for better sight according to a place of
use. You can also set the time that elapses until the screen light turns off
automatically after the last operation.

1

Tap

and then Settings. On the System tab, tap Screen light.

2

Set the Screen light on battery power.

Check to activate power save mode. It will make
the screen light turn off automatically when the
Pocket PC has not been used for a user-set
amount of time.

Check to make the screen light turn on
automatically when a button is pressed or the
screen is tapped.

Set the time that elapses until the screen light
turns off automatically.

Advertising
This manual is related to the following products: