Caractéristiques, Tips for successful vacuum packaging, Précis d’emploi – FoodSaver V2040-I User Manual

Page 4: V2040-i, Français), Caractéristiques du soude-sac foodsaver, General tips

Advertising
background image

Caractéristiques

Renseignements de sécurité importants et conseils pratiques : consultez le Guide de référence FoodSaver

®

fourni avec l’ensemble.

Précis d’emploi

V2040-I

( Français)

Tuyau à accessoires

Rangement pour
tuyau à accessoires

Commandes à
effleurement

Loquet pratique

D

C

B

A

Canal d’aspiration

Ramasse-gouttes
facile d’entretien

Bande de soudure

Joint de caoutchouc

H

G

F

E

Caractéristiques du soude-sac FoodSaver

®

General Tips

Tips for Successful Vacuum Packaging

(continued)

1.

Vacuum packaging is NOT a substitute for the
heat process of canning. Perishables still need to
be refrigerated or frozen.

2.

For best results, use FoodSaver

®

Bags and

canisters.

3.

During the vacuum packaging process, small
amounts of liquids, crumbs or food particles can
be inadvertently pulled into Vacuum Channel

(E)

,

clogging the pump and damaging your appliance.
To prevent this, follow these tips:

a.

For moist and juicy foods such as raw meats:
Freeze first and avoid overfilling bags. You can
also place a folded paper towel inside top of bag,
but below seal area, before vacuum packaging.

b.

For soups, sauces and liquids: Freeze first and
avoid overfilling bags. Or, use a canister and
store in the refrigerator.

c.

For powdery or fine-grained foods: Avoid
overfilling bags or use a canister. You can also
place a coffee filter or paper towel inside
before vacuum packaging.

d.

If your appliance features a Drip Tray

(F)

,

empty it after each use.

4.

To avoid overfilling, always leave at least 7.5 cm
of bag material between bag contents and top of
bag. Then leave at least additional 2.5 cm of bag
material for each time you plan to reuse bag.

5.

Do not create your own side seams for a
FoodSaver

®

Bag. These bags are manufactured

with a special side seam, which is sealed all the
way to the outer edge.

6.

To prevent wrinkles in seal when vacuum
packaging bulky items, gently stretch bag flat
along Sealing Strip

(G)

before you close lid.

7.

If you are unsure your bag was sealed properly,
simply reseal bag about 0.5 cm above first seal.

8.

When you are vacuum packaging items with sharp
edges (dry spaghetti, silverware, etc.), protect
bag from punctures by wrapping item in soft
cushioning material, such as a paper towel.

9.

When using accessories, remember to leave 2.5
cm of space at top of canister or container.

10.

Pre-freeze fruits and blanch vegetables before
vacuum packaging for best results. See pages 2-3
of FoodSaver

®

Reference Guide for more

information.

11.

If appliance does not function, check to make sure
the lid is properly engaged.

12.

Always store appliance with the Easy Lock Latches

(D)

in the unlocked position.

13.

CAUTION:

THIS SEALER IS NOT FOR

COMMERCIAL USE. IF SEALING MORE THAN
30 BAGS OR CANISTERS IN A ROW, WAIT AT
LEAST 25 MINUTES BEFORE CONTINUING TO
USE YOUR VACUUM FOOD SEALER.

© 2007 Sunbeam Products, Inc. doing business as Jarden Consumer Solutions. All rights reserved.

Distributed by Holmes Products (Europe) Limited. 1 Francis Grove, London, SW19 4DT, England.

Printed in China

6

7

Quick Start Guide V2040-I.qxd 8/15/07 8:30 Page 6

Advertising