SENAO EnGenius EP-801 User Manual

Page 18

Advertising
background image


~35~

3. To leave the mute state, press

UNMUTE

(Left) soft key. Mute is effective

only for the current call.

4
.

When in a call via base, you can press

to mute the base

microphone.

5
.

To leave the mute state, press

key.


Do Not Disturb (Silent Ring)

1. Enter the key sequence MENU-3-1, then select “Off”.

Press

SELECT

(Left) to confirm your choice. This will

turn off the ringer until it is turn on again from the
menu.

Re: When setting the ringer “Off”, the standby screen

will show “Ringer off”.

2. For temporary silencing the ringer when an incoming

call arrives, press

SILENT

(Left) soft key.

3. Press the

key repeatedly until the base ringer silent, this will turn off

the base ringer. When incoming call, the base will not ring.

4. Press the

key to turn on the base ringer.

Key Guard

1. To prevent accidental dialing, you can press

MENU

(Right) soft key, then press “1” to select KeyGuard
option. The handset keypad is locked. No key entry is
accepted.

2. To unlock the keypad, press

UNLOCK

(Left) soft key,

then, within 2 seconds, press the digit “*” to unlock.


~36~

3. Once returning back to idle mode for 30 seconds, the

keyguard will be automatically enabled.

4. Key Guard is in effect until unlocked.

Battery Recharge and Replacement


1. Charge the battery when one or several of the following happen:

a. Phone beeps twice every two seconds.

b.

Battery

icon

is

empty.

c. Phone does not respond when a key is pressed.

d. LCD and backlighting become dim.

e. Talk range shortfall is experienced.

2. You can replace the handset battery after placing the call-in-progress on

hold.

3. Battery talk time and standby time vary depending on the talk/standby

pattern and the operating distance. Putting the handset back to charger
cradle as often as possible is recommended for best performance. Use
only manufacturer provided battery and charger!

Advertising