SENAO EnGenius EP-801 User Manual

Page 23

Advertising
background image


~45~

a. Once turn on the Call Barring feature, you can key

in the “Call Barring” code.
Press

ADD

(Left) soft key then start entering the

Call Barring code After the number entered, press

SAVE

(Left) soft key to save it.

(1) Up to 5 digits can be edit to be Call Barring code. For

example, if you want to block all call dialing to
Manhanttan, NY area, you can enter 1212 as the
Call Barring code.

(2) If you base station is adjuct to a PBX system, please

also include that specific number to retrieve the
PSTN tone.

b.

Press

OPTION

to delete or edit the Call Barring

codes.

c. Up to 5 set of Call Barring codes can be

programmed.

d. If wants to block all outgoing calls, enter “****

”, press

SAVE

(Left) soft key to save it, all

outgoing calls will be restricted.

Block Incoming Call

1. Press

SELECT

to confirm your selection for

“Incoming”.

Use

or

scrolling key to select blocking

item.

a.

Press

SELECT

to confirm your selection for

receiving or blocking broadcasting.

Press

CHANGE

to switch between On and Off of

this setting.

Re: “On” means to be able to receive broadcast
from other hansets or base. “Off” means to restrict
the broadcast from other handsets or base.


~46~

b. Press

SELECT

to confirm your selection for

receiving or blocking line call.

Press

CHANGE

to switch between On and Off of

this setting.

Re: “On” means to be able to receive calls from
outside line; “Off” means to restrict calls from
outside line .

c, Press

SELECT

to confirm your selection for

receiving or blocking intercom call.

Press

CHANGE

to switch between On and Off of

this setting.

Re: “On” means to be able to receive intercom
calls from other handsets or base; “Off” means to
restrict intercom calls from other handset or base.

Programmable Feature Call


1. If EP801 base unit is installed behind a PBX system, it is feasible to pre-

program some feature call along with the PBX’s feature code into the
system.

2. Up to 10 most frequently used feature call codes can be pre-

programmed.

3. Name and enter feature call codes:

a. Press

MENU

(Right) soft key while the handset is

in the standby mode.

b. Press “4”, followed by “4” to enter the “Feature Call”

menu.

c. Press

ADD

(Left) soft key to add a new entry of

feature call.

d. Key in the name of feature call, like editing a

phonebook entry, i.e. “PBX Transfer”.
Press

SAVE

(Left) soft key to confirm.

Advertising