Recovering to out-of-box state, Recommended recovery method), Recovering to out-of-box state (recommended – Toshiba PORTEGE R700 series User Manual
Page 62
62
Getting Started
Recovering the Internal Storage Drive
Recovering to out-of-box state (recommended recovery method)
Recovering an internal storage drive to its out-of-box state deletes all
partitions on the drive and all information stored in those partitions.
Be sure to save your work to external media before executing the
recovery. For more information, see
.
During the recovery process it is strongly recommended that your
computer be connected to an external power source via the AC
adaptor.
You can recover the original factory image (returning the computer
to its out-of-box state) using the utilities stored on your computer’s
internal storage drive or using recovery DVDs/media, if you have
created such media. To recover using the first method, follow the
procedure below. To recover using the second method, see
“Restoring from recovery DVDs/media” on page 72
To recover the original factory image using the utilities on your
computer’s internal storage drive:
1
Make sure the computer is turned off.
2
Press and hold the 0 (zero) key on your keyboard while
powering on the computer.
3
If your system offers a choice of Windows
®
7 32-bit or 64-bit
operating system, select one at this time. If not, skip to step 4.
4
A warning screen appears, stating that when the recovery is
executed all data will be deleted and rewritten. Click Yes to
continue.
NOTE