Texas Instruments TI-83 PLUS - Manual (Page 649)

TI-83 Plus Communication Link 646
Receiving from a TI-83
You can transfer all variables and programs from a TI-83 to a TI-83 Plus
if they fit in the RAM of the TI-83 Plus . The RAM of the TI-83 Plus is
slightly less than the RAM of the TI-83.
Receiving from a TI-82 — Resolved Differences
Generally, you can transmit items to a TI-83 Plus from a TI-82, but
differences between the two products may affect some transmitted data.
This table shows differences for which the software built into the
TI-83 Plus automatically adjusts when a TI-83 Plus receives TI-82 data.
TI . 82 TI-83 Plus
nMin PlotStart
nStart nMin
U n u
V n v
U nStart u( nMin)
V nStart v( nMin)
TblMin TblStart
For example, if you transmit a program that contains nStart on a
command line from a TI-82 to a TI-83 Plus , you will see that nMin has
automatically replaced nStart on the command line of the TI-83 Plus .