Procedure before operation – Toshiba TEC SL-9000N-FFH-QR User Manual
Page 17
6.
PROCEDURE BEFORE OPERATION
6. PROCEDURE BEFORE OPERATION
6- 1
6. PROCEDURE BEFORE OPERATION
1.
Ask an authorized installing dealer for the scale installation. Please contact your nearest
TOSHIBA TEC representative.
2.
Hang the platter arm from the scale. (See page 7-1.)
3.
Load the label or receipt.
4.
Set the following programming menus:
Menu Page
ITEM No.
Programming Name
2
0
PRINT FORMAT
2
1
DATE/TIME SETTING
1
1
PLU DATA SETTING
If necessary, set the following program menu:
Menu Page
ITEM No.
Programming Name
1
2
INGREDIENT MESSAGE
1
3
NUTRITION SETTING
1
5
ADDRESS AND COMMECIAL MESSAGE SETTING
1
7
SPECIAL INFORMATION
1
8
GRADE LINE
1
9
SPEED KEY SET
5.
Call a PLU which contains the unit price used in weighing mode, then place a weight on the platter
and check a correct price is displayed.
6.
Label issued is ready.
NOTE: For details of the programming menus, refer to Section 10.