Tonino Lamborghini OperationGuide MDR24/96 User Manual

Oper a tion guide, Locate points and looping, Time display

Advertising
background image

37

Operation Guide

Oper

a

tion

Guide

LOC 2

LOC 1

LOC 2

LOC 1

STORE

Locate Points and Looping

Locate points provide fast access to frequently used locations in your Project.
The MDR24/96 has two numbered Locates (two additional numbered Locates
are available when using the Remote 24 or Remote 48). Storing a Locate point
saves the Current Time (Transport position) to the Locate button. Recalling a
Locate causes the Transport to jump to the stored time.

To recall a Locate point:

Press LOC 1 or LOC 2 to jump to that point.

To store numbered Locate points:

Locate points can be stored either on the fly or when stopped.

1. Press STORE. The store light will blink to indicate that the

MDR24/96 is ready to save a Locate point.

2. Press LOC 1 or LOC 2 when the Transport is at the

desired time; the store light will go out, indicating that
the point has been stored.

Locates 1 and 2 double as start and end points for looped playback. When
looping is enabled, playback cycles between the Loop Start and Loop End
points. The order of the Loop points does not matter. If Current Time is
outside the Loop points when playback starts, the transport jumps to the Loop
Start point; if it is between the Loop points, playback starts from Current Time.

To enable Looping:

1. Press LOOP 1-2 to enable looping.

2. Press PLAY to start loop playback.

Locates 3 and 4 serve as punch-in and punch-out points when PUNCH is
selected from a remote control. Punch is an automatic recording feature that
switches a record-armed track (or tracks) into Record mode at a specified
punch-in point (LOC 3), and takes it out of Record at the specified punch-out
point (LOC 4). See “Auto Punch” on page 42 for more details.

LOOP

1–2

Time Display

The Current Time display shows the exact position of the MDR24/96’s
“playback head.” Current Time is displayed in SMPTE time
(HH:MM:SS:FRAMES).

To change the Current Time:

Use the Transport PLAY, REWIND, FAST FWD or LOC buttons.

MDR24/96 Front Panel

MINUTES

HOURS

SECONDS

FRAMES

TICKS

BEATS

BARS

K

Current Time Display

Advertising