Technicolor - Thomson TM9235 EN User Manual

Safety information, For uk only

Advertising
background image

EN

Safety Information

For UK Only

CONNECT THE MAIN LEAD INTO A MAINS
POWER SOCKET

POWER SUPPLY 230V. It must not be
connected to D.C. mains.

Note: The mains lead of the set is fitted with a
moulded plug. If the mains socket are not
compatible or if for any reason the plug is
removed please follow the directions below.
The moulded plug cannot be rewired and if
removed must be disposed of safely.

DO NOT under any circumstances plug the
severed plug into any mains socket as this could
result in electric shock.

Important: If the plug is removed, rewire the
new plug as follow:

The wires in the mains plug are coloured in
accordance to the following code:

BLUE = NEUTRAL/BROWN = LIVE

If the colours of the wires in the mains lead of
this apparatus may not correspond with the
coloured markings identifying the terminals in
your plug, proceed as follows:

BLUE wire to the terminal coded N (Neutral) or
coloured black.

BROWN wire to the terminal coded L (Live) or
coloured red.

DO NOT make any connection to
the terminal in the plug which is
marked

by the letter E or by the earth
symbol or coloured green or
green and yellow.

A fused plug must be
fitted with a 3A fuse
approved by ASTA or
BS1362 and fuse
covers must be
always be securely
replaced. If you set
does not work, the
fuse may be blown.

TM9235 EN

12/10/04, 10:32 AM

2

Advertising