Unitech MSR120 Series User Manual

Features, Configuration, Agency approved

Advertising
background image

MSR120 Simple Manual

2003/1/21

MSR 120 SERIES

Magnetic Stripe Card Reader

Universal Serial Bus (USB) Interface

Thank you for purchasing the MSR120 series products.

The MSR120 Series USB Interface Magnetic Card Reader is ideal for retail

systems, time keeping systems, security systems and the card reader related systems.

The MSR120 series are designed to offer the user

a card reader solution that will complement many applications. Triple track MSR120 reader is uniquely designed to read both credit

cards and Driver Licenses (AAMVA and California standard).

FEATURES

1

Light weight: 120g

2

Compact size: 100L*34W*28H (mm)

3

LED and Buzzer indicators indicate card status

4

Low power consumption

5

Single, dual, or triple track versions allow for reading all types of magnetic cards, including credit cards and drivers licenses.

CONFIGURATION

MSR120-33 Triple track 1&2&3

AGENCY APPROVED

- Comply with the limits for a Class A digital device, pursuant to part 15 of the FCC rules.

- Comply with CE mark Class A, UL, and cUL

WARRANTY

This product is served under one-year warranty of defects in material and functionality to the original purchasers. Within the warranty

period, if the product found to be defective will be repaired or replaced. This warranty applies to the products only under the normal use

of the original purchasers, and in no circumstances covers incidental or consequential damages through consumers’ misuse or

modification of the product.

WARNING

You are cautioned that changes or modifications not expressly approved by the party responsible for compliance could void your

authority to operate the equipment.

SET-UP

1) Turn the system power off.

2) Connect PC and MSR120 USB connector of signal cable to a free USB port

3) Turn the system power on.

4) Install USB driver (ref. to Appendix A)

SPECIFICATIONS

Recording Method: Two-frequency coherent phase (F2F), compatible with ISO 7811 and AAMVA.

Swipe Speed:

5 to 50 in/sec (worst case with +/- 12% jitter card)

Power Requirements:

5VDC/120mA

Excerpt from MSR120 Programmer’s Manual (PM010, Rev.1.1) Page 1 / 5

--- Proprietary and Confidential ---

Advertising