Unibrain 830 - Manual (Page 38)

Unibrain Fire-i 530/630/830 Operation Manual Page 32
3.10. Strobe Control Register
Base Address: 0xF2F23000h
Address Name Field Bit Description
000h Strobe_CTRL_Inq Strobe_0_Inq [0] Presence of strobe 0 signal
Strobe_1_Inq [1] Presence of strobe 1 signal
Strobe_2_Inq [2] Presence of strobe 2 signal
Strobe_3_Inq [3] Presence of strobe 3 signal
- [4..31] Reserved
004h
.
.
0FCh
Reserved
100h Strobe_0_Inq Presence_Inq [0] Presence of this function
- [1..3] Reserved
ReadOut_Inq
[4]
Capability of reading the value of this
feature
On/Off_Inq
[5]
Capability of switching this function ON
and OFF
Polarity_Inq
[6]
Capability of changing polarity of the
signal
- [7] Reserved
Min_Value [8..19] Minimum value of this function control
Max_Value [20..31] Maximum value of this function control
104h Strobe_1_Inq Same definition to Strobe_0_Inq
Strobe_2_Inq Same definition to Strobe_1_Inq
Strobe_3_Inq Same definition to Strobe_2_Inq
110h
.
.
1FCh
Reserved
200h Strobe_0_Cnt Presence_Inq
[0]
Presence of this function
0:N/A 1: Available
- [1..5] Reserved
ON_OFF [6]
Write : ON or OFF this function
Read: read a status 0: OFF, 1: ON
if this bit=0, other fields will be read only
Signal Polarity [7]
Select signal polarity
If Polarity_Inq is “1” Write to change
polarity of the strobe output Read to get
polarity of the strobe output
If Polarity_Inq is “0” Read only ( 0: lowa