Unibrain 830 - Manual (Page 51)

Unibrain Fire-i 530/630/830 Operation Manual Page 45
4.7. Memory Channel Save / Load
The setting of the camera features (Shutter, Gain, etc) and video mode can be stored in a non-volatile memory. The
camera supports 16 memory channels as per the table below for the user to conveniently save and load different
features as well as video modes. Channel 0 is for factory default and Channels 1~4 are for saving features.
Channels 5~15 are for resolution, mode and frame rate plus saving other features.
Address Name Bit Description
618h Memory_Save [0] Saves the current setting
[1..31] Reserved
Address Name Bit Description
620h Mem_Save_Ch [0] Factory Default Setting Cannot overwrite
[1..4] Write Channel for Memory Save for Channel 1 ~ 4
( Only for Features )
[5..15] Write Channel for Memory Save for Channel 5 ~ 15
(For Features, Format and Mode Save)
Address Name Bit Description
624h Cur_Save_Ch [0] Read and Load Factory Default Setting
[1..4] Read and Load Memory Channel 1 ~ 4
[5..15] Read and Load Load Memory Channel 5 ~ 15
User Defined FireWire Register Control
The values saved in the channel are users define; and can be made the default values at power-on. The channels
from 1 to 15 are to be set in the power-on default mode.
Address Description( bit : msb*) Read/Write
0xF2F1011C Power on default memory channel
Bit 0 ~ Bit 3 : power on initial memory channel
Read/Write