Ultra Products Nordson v051806 - Manual (Page 17)

17
Pourable fluids are easy.
Just fill the barrel. For
best results, fill up to 50%
of the barrel capacity.
920/940 Series syringe barrel loader
For nonpourable fluids, including grease, pastes, sealants, and
others, manually load or use an EFD syringe barrel loader.
With the #920BL barrel
loader, pack the fluid into a
12 ounce cartridge. Then
place the pre-filled cartridge
into the barrel loader. Using
air pressure, the barrel loader
fills the syringe barrel (with a
piston installed) from the bottom up.
If the fluid comes packed in a 300 ml. (1/10 gallon)
caulking type cartridge, use the EFD #940BL barrel loader.
If you receive frozen epoxies or other fluids in medical type
syringes with a manual plunger, request the EFD luer-to-luer
fitting #2160 to transfer the material.
EFD valve system
For cyanoacrylates, consider transfer from 1 lb bottles to
barrels using our 752V valve system, or incorporate a
controller to provide exact fills automatically.
controller air
752V-UH valve
holds 1 lb
cyanoacrylate
bottle
Syringe Barrel Loaders
17
8000BF-HPA for use with
fluid supply pressures
above 6.9 bar (100 psi).
8000BF-HF for use with cartridge
and tank reservoirs at fluid supply
pressures up to 6.9 bar (100 psi).
8000BF-PW for use with reactive fluids that
require disposable fluid path — up to 5.5 bar
(80 psi) fluid supply pressure.
8000BF automated filling station
For automatic filling of barrels, our 8000BF system
makes this operation fast, easy, accurate and clean.
The 8000BF can be configured several ways to meet
your specific needs.