The system, Tank reservoirs, Key features – Ultra Products Nordson v051806 User Manual

Page 9

Advertising
background image

dispense tip

9

Model

#615DTH

#626DTH

Tank body

cast aluminum

cast aluminum

Inside diameter

9.7 cm (3.82")

17.3 cm (6.81")

Inside depth

1.75 cm (6.87")

24.8 cm (9.75")

Replaceable liner

polyethylene

polyethylene

Liner capacity

0.95 liter

3.8 liters

Overall width

17.3 cm (6.81")

28.3 cm (11.14")

Overall height

35.6 cm (14.01") 40.6 cm (15.98")

Regulator & gauge

100 psi (6.9 bar)

100 psi (6.9 bar)

Max. operating
pressure

100 psi (6.9 bar)

100 psi (6.9 bar)

Bottle size accepted 1 pound

1 liter

#615DTL

#626DTL

Regulator & gauge

15 psi (1.0 bar)

15 psi (1.0 bar)

Model 615DTH:
1.0 liter tank

Model 626DTH:
5.0 liter tank

Tank reservoirs

Each tank is shipped complete
with constant bleed precision
air regulator and gauge, air hose,
liner and fluid feed tubing.

trigger grip

hanger not shown

Key Features

End-of-cycle snuff-back

Ergonomic design

Positive shutoff

Simplified maintenance

725-HL

Designed for dispensing thicker fluids such as epoxies,

fluxes, sealants and wood glues. The 725-HL provides

relatively high flow for heavy-duty operation, without

maintenance or downtime. It features a piston design

for clean, positive shutoff and end-of-cycle snuff-back.

The System

Choosing the right tank is primarily based on two factors:

how much fluid you are dispensing and whether the fluid is

supplied in 1 pound or 1 liter bottles.

The air regulator is selected based on fluid viscosity. Watery

fluids require the 0-1.0 bar (0-15 psi) regulator, while

thicker fluids need the 0-100 psi (0-6.9 bar) regulator.

Since tanks are charged by plant air, we recommend the

five-micron filter regulator to filter contaminants. See

accessories, page 19, for details.

Advertising