UltraViolet Devices Altru-V Ultravoilet Lamp System User Manual

V-ray v-ray™ sus sus

Advertising
background image

vb:

uv_>

V-RAY

V-RAY™ SUS

SUS

• 4-lamp sizes (12", 21", 33" and 61")

• Lowest mercury content available

• UV output regulated to keep levels

within ACGIH and NIOSH exposure
guidelines (patent pending) thus
– Extending lamp life and
– Ensuring safe exposure limits for

room occupants or materials

• UL recognized components, ETL Listed

• Ideal for any vertical or horizontal

system

• Ease of installation – Simple Lamp

Clasps (magnetic Lamp Clasp optional)

• Single point electrical connection

• UVC resistant materials

• Screw terminals for easy field wiring

• Remotely located power source

offering ease of installation and
mounting options

• Restores air handling unit to near

optimal operating capacities

• Can lower energy costs for restored

systems

• Reduces costly maintenance and

cleaning programs

• Eliminates foul system odors (dirty

sock syndrome)

• Has one of the lowest ownership

costs in the industry

• Improves indoor air quality by

destroying system microbes

• Will not harm building occupants,

equipment or furnishings

• One-year warranty on both the fixture

and the lamp

All ALTRU-V products are designed to transform HVAC efficiency, maintenance

and longevity. By applying real science, the relentless cleaning power of UV and

the most affordable products by UVDI, optimal HVAC maintenance solutions can

replace outdated mechanical and chemical cleanings that can be both costly and

dangerous and shorten equipment life. The results are lower operating costs,

safer environments for maintenance personnel and occupants, as well as

documented cleaner air.

ALTRU-V’s V-Ray™ provides unique electronically controlled energy output (patent

pending) at registers and grills to meet acceptable levels as recommended by the

National Institute for Occupational Safety and Health (NIOSH) and the American

Conference of Governmental Industrial Hygienists (ACGIH), yet it delivers the

proper amount of energy necessary to control the growth of micro-organisms such

as mold and bacteria.

Easily Installed into hard to access systems delivering continuous
irradiation for improved heat exchange efficiency while reducing
foul odor, drain pain overflows and expensive coil cleanings!

REPRESENTED BY:

UVC Fixturing

– Fixturing consists of a

lamp, lamp clasps, UVC resistant wiring
harness, power supply and power supply
housing.

Lamps

– Each lamp contains no more

than 5 milligrams of mercury. Lamp life
is 9000 hours with no more than a 20%
output loss at the end of the lamps life.
Lamps are constructed with UVC resistant
bases and do not produce ozone. When
used for surface irradiation, the lamp
selected will be equal to or no less than
90% of the coil width.

Irradiation

– Fixtureless lamps are to be

installed in sufficient quantity and in such
a manner as to provide an equal distribu-
tion of UVC energy. When installed, the
UVC energy produced will be of the lowest
possible reflected and shadowed losses.
Note: the applied energy and its distribu-
tion shall be verifiable using third
party algorithms.

Intensity

– The minimal UVC energy

striking a surface is sufficient to continu-
ously destroy a monolayer of mold and
bacteria in less than six hours when at
55–135°F. The third party modeling shall
be available to determine the destruction
time for at least four of the most common
fan coil surface microbes.

Lamp Clasp

– Lamp Clasps may be

permanently or magnetically affixed to the
irradiated cavity. They are constructed of
high memory, plated steel for maximum
holding power and corrosion resistance.

Lamp Wire

– Is of sufficient length to

facilitate lamp connection to a remotely
located ballast. It includes a grommet to
facilitate safe passage through sheet metal
and into the ballast housing. Lamps are
capable of being mounted anywhere in the
system and/or as shown on the plans.

Power Supply

– Power supplies are of

the high efficiency electronic type, matched
to the lamp and designed to optimize UVC
photon production and reliability. They are

UL Listed and labeled for use in air-streams
of 55–135°F. They are capable of pro-
ducing the specified output and organism
destruction as listed under Irradiation and
Intensity above at no more than 13 Watts
of power consumption for each square foot
of treated, cross sectional area.

Installation

– Fixturing are electrically

terminated to within factory supplied ballast
housings to meet NEC and local codes.
Lamps should be mounted to irradiate the
intended surface(s) as well as all of the
available line of sight airstream by proper
placement and incident angle reflection.

Safety

– To protect maintenance

personnel, all access panels and doors
to the UVC assembly and/or within view
of the UVC assembly must include mechan-
ical interlock switche(s) to insure that the
UVC assembly will be de-energized when
any of these accesses are opened.

1. V-Ray Bulb Lengths:

61”*, 36”, 24” and 12”*.

2. V-Ray Magnetic Clip

1

2

ALTRU-V (A Division of UVDI)
26145 Technology Drive
Valencia, CA 91355
Tel

877-PUREUVC (877-787-3882)

Tel

661-295-8140

Fax 661-257-4698
www.altruv.com

Specifications subject to change without notice.

V-Ray SUS: 12”, 21”, 33”, 61” Lamp Sizes.

Copyright 2004 UVDI. ALTRU-V and V-Ray SUS are trademarks owned by UVDI. Patent Pending. 23-1004 Rev A

Model No.

Description

Lamp Dim.

Electrical

Weight

P/N

VRSUS 12

V-Ray UVC Fixture

12” *

100–277Vac, 50-60 Hz, 11 Watts

3 lbs.

23-1012

VRSUS 21

V-Ray UVC Fixture

21”

100–277Vac, 50-60 Hz, 15 Watts

3 lbs.

23-1021

VRSUS 33

V-Ray UVC Fixture

33”

100–277Vac, 50-60 Hz, 21 Watts

3 lbs.

23-1033

VRSUS 61

V-Ray UVC Fixture

61” *

100–277Vac, 50-60 Hz, 31 Watts

5 lbs.

23-1061

VR MC

V-Ray UVMagClasp (Pair)

0.5 lbs.

23-1063

* The V-Ray 12” and 64” units are non-inventory items subject to varying lead times.

Hg-LAMP CONTAINS MERCURY. Manage in Accord with
Disposal Laws. See: www.lamprecycle.org or call 877-PUREUVC

Advertising