Unimac AU07-208 User Manual

Specifications, Expert solutions from the laundry experts, On-premises washers & dryers

Advertising

Specifications

AU07-208

On-Premises

Washers & Dryers

Commercial Topload Washer

Commercial Frontload Washer

Commercial Stack Washer/Dryer

Commercial Dryer

Commercial Stack Dryer

Expert Solutions from the Laundry Experts

Alliance Laundry Systems

Shepard Street, Ripon, WI 54971 Telephone: 1-800-587-5458

www.uniwash.com

* IMPORTANT: Any product revisions or conversions must be made by

the Manufacturer’s Authorized Dealers, Distributors, or local service
personnel. Any approvals may vary depending on configuration.
Consult factory for details.

** Measured at point of exit from dryer. Maximum exhaust static back pressure:

60 Hz: 0.6" W.C. Gas models are certified by CSA International; electric
models are Underwriters Laboratories certified.

For the most accurate information the installation guide should be used
for all design and construction puroposes. Due to continuous product
improvements, design and specifications are subject to change without
notice. The quality management systems at all Alliance Laundry Systems
manufacturing facilities have been registered as ISO 9001:2000 compliant.
Features and certifications may vary by model.

Printed in the U.S.A.

Printed on paper manufactured with virgin pulp from
certified sources and a minimum of 10% post-consumer
recovered fiber.

Washer

Topload

Frontload

UWT821

FTUA1

Width - in (mm)

25 5/8" (651)

26 7/8" (683)

Depth - in (mm)

28" (711)

Height - in (mm)

43" (1092)

41 3/8" (1054)

Height to Work Surface - 36" (914)

41 3/8" (1054)

in (mm)

Operation

Manual Control

Basket Volume -

2.8 (79)

2.84 (80)

cu. ft. (liters)

Spin Speed - RPM

High Speed 710

500, 650,

Low Speed 473

1000

Water Temperatures

Hot, Warm and Cold

Hot/Cold, Warm/Warm
Warm/Cold, Cold/Cold

Cycles

Normal, Permanent Press

Regular, Permanent Press,

or Delicate

Delicate, Rinse and Spin
or Spin

Cycle Time

16-31 minutes

27 minutes

plus fill time

Water Pressure -

Pressure fill 20 to 120

psi (bar)

(1.4/8.3)

Cycle Cue Lights

Yes

Top and Lid Finish

Porcelain

Color

White

Motor

2-speed, 1/2 HP reversing

Multi-speed 3/4 HP

for 1725 or 1140 RPM

Electrical Specifications

120/60/1-15 amp

Net Weight (Approx.) -

190 (86)

240 (109)

lb (kg)

Dom. Shipping Weight

210 (95)

260 (118)

(Approx.) - lb (kg)

Agency Approvals

UL,

Dryers

Single Rear Control

Single Front Control

Stack

UDE807 (Electric)

FEU17 (Electric)

USE807 (Electric)

UDG809 (Gas)

FGU17 (Gas)

USG809 (Gas)

Width - in (mm)

26 7/8" (683)

Depth - in (mm)

28" (711)

Height - in (mm)

43" (1092)

41 3/8" (1054)

76 5/8" (1946)

Height to Work Surface - 36" (914)

41 3/8" (1054)

N/A

in (mm)

Cylinder Volume -

7.0 (198)

cu. ft. (liters)

Color

White

Motor HP

60 Hz: 1/3 HP, 5.5 amp

Motor RPM

60 Hz: 1725

Btu Per Hour

25,000 (6,300 kcal)

Electrical Requirements Gas:

Gas:

120/60/1 - 15 amp

Electric:

120/240/60/1 - 30 amp

120/208/60/1 - 30 amp

Heating Element

60 Hz: 5350W, 240V

(Electric)

Also 4750W, 208V

Type of Gas

Factory-equipped for

(Gas models only)

natural/mixed gas

Convertible to LP gas*

Utility Connections -

3/8" NPT (9.5)

in (mm)

Air Outlet Diameter -

4" (102)

in (mm)

Exhaust Airflow**

220 (105 liters/sec.)

Net Weight (Approx.) -

Gas: 140 (64)

Gas: 155 (70)

Gas: 275 (125)

lb (kg)

Electric: 135 (61)

Electric: 150 (68)

Electric: 265 (120)

Dom. Shipping Weight

Gas: 150 (68)

Gas: 165 (75)

Gas: 290 (132)

(Approx.) - lb (kg)

Electric: 145 (66)

Electric: 160 (73)

Electric: 280 (127)

Agency Approvals

UL, CSA

Stack Washer/Dryer

LTUA7 (Electric)
LTUA9 (Gas)

Width - in (mm)

26 7/8" (683)

Depth - in (mm)

28" (711)

Height - in (mm)

75 1/4" (1911)

Color

White

Net Weight (Approx.) -

Gas: 355 (161)

lb (kg)

Electric: 350 (159)

Dom. Shipping Weight

Gas: 385 (175)

(Approx.) - lb (kg)

Electric: 380 (172)

Agency Approvals

UL, CSA

Strong Limited Parts Warranty

UniMac proudly offers the following limited warranties on its topload washer:
Through Three Years* — any part on the entire machine.
Through Five Years* — the transmission assembly.
Through Lifetime* — the stainless steel washtub.

UniMac proudly offers the following limited warranties on its frontload washer:
Through One Year* — any part on the entire machine.

UniMac proudly offers the following limited warranty on its commercial dryer:
Through Three Years* — any part on the entire machine.

* Parts only, labor not included. See UniMac Warranty Bond for specifics.

Motor

Hot/Cold, Warm/Warm
Warm/Cold, Cold/Cold

Advertising

Popular Brands

Popular manuals