Client settings – Vivotek PT3122 User Manual
Page 18
- 18 -
www.vivotek.com
T:
886-2-82455282
F:
886-2-82455532
Client Settings
At the initial access to the “Connection type” page in Windows, the web browser will
ask for a new plug-in installation, the plug-in being the Network Camera. This plug-in
has been registered for certification and can be used to change the parameters at the
client’s site. The user may click on
to install the plug-in. If the web browser
does not allow the user to complete the installation, check the Internet security to
lower the security level or contact your IT or networking supervisor.
There are two settings for the Client site. One is “Media Option” for the User to
determine if audio should be muted. The other is “Protocol Option” which allows
choices on connection protocol between client and server. There are three protocol
choices to optimize your usage - UDP, TCP and HTTP.
The UDP protocol allows for more real-time audio and video streams. However,
some packets may be lost due to network burst traffic and images may be obscured.