Vivotek PT3122 - Manual (Page 34)

- 34 -
www.vivotek.com
T: 886-2-82455282
F: 886-2-82455532
“SMTP account name 1” Some SMTP server requires an account name for logging
in. Refer to your SMTP administrator for detailed information.
“SMTP password 1” The password for the SMTP server account.
“SMTP (mail) server 2” The domain name or IP address of another email server
once the previous server is unreachable.
“Recipient email address 2” The email addresses of the recipients for the backup
server.
“SMTP account name 2” The account login name for the second SMTP server.
“SMTP password 2” The password for the second SMTP account name.
“Return email address” The return email address used in the event the mails fail to
be sent out.
FTP
“Local FTP server port” This can be other than the default Port 21. The user can
change this value from 1 to 65535. After the change, the external FTP client
program must change the server port of connection accordingly.
“1st FTP server” The domain name or the IP address of the external FTP server. The
following user settings must be correctly configured for remote access.
“1st FTP user name” Granted user name on the external FTP server.
“1st FTP password” Granted password on the external FTP server.
“1st FTP remote folder” Granted folder on the external FTP server. The string must
conform to that of the external FTP server. Some FTP servers cannot accept
preceding slash symbol before the path without virtual path mapping. Refer to the
instructions for the external FTP server for details. The folder privilege must be open
for upload.
“Primary FTP passive mode” The Network Camera is located inside the network
protected by a firewall, data connection for FTP may be prohibited. By selecting
passive mode, the FTP can bypass the rule and allow snapshot upload to proceed. If
the passive mode is selected, the Network Camera can automatically attempt for
active mode, if the external FTP server does not support passive mode.
“2nd FTP server” The domain name or IP address of the backup external FTP
server.
“2nd FTP user name” Granted user name on the backup FTP server.