Remote controller – Vivotek PT3122 User Manual

Page 44

Advertising
background image




- 44 -


www.vivotek.com

T:

886-2-82455282

F:

886-2-82455532


Remote controller

Models PT3112 and PT3122 both provide a remote controller to command the
camera’s pan/tilt and other functions. The direction control part provides the
function as on the main web page.
The Pan/Patrol/Stop functions are also the same as on the main web page.


Auto Patrol” This button commands the camera to patrol between the preset
positions on the patrol list that was set on the “Camera control page”. After each
patrol cycle, the camera stops at the original staring position. “Auto Pan” This
button commands the camera to pan from the current position to the left most or
right most and back. After panning both horizontal end positions, the camera would
stop at the original starting position.
Center” This calibrates the camera’s position to aim at the center as the camera
boots up.
Stop” This stops the auto movements (auto pan & auto patrol) of the camera.

Direction control
area

Auto movement
control area

Advertising