VIEWSONIC ND5000 - Manual (Page 11)

ViewSonic ND4200/ND5000 7
SETTING UP THE NETWORK DISPLAY
1. Connect to a Switch or Router
Connect an RJ-45 Ethernet cable from the Network Display to either a
switch or a router. See your IT Administrator for a code to the switch or a
router. The Router shown is a ViewSonic WMG100. Connect the AC power
cord from the Network Display to an AC power source like a wall outlet.
RJ-45 Ethernet
cable
AC power cord
PC
ND4200/ND5000 Network Display
Switch or Router
RJ-45 Ethernet cable