Vermont Castings ESSENTIA NV-E6DMS-DC User Manual

Georgian bay 36/41

Advertising
background image

Georgian Bay 36/41”

Installation Instructions
Models:
36DVBGTKCB, 36DVBGTKB
41DVBGTKCB, 41DVBGTKB

DVBGTKCB – Classic Black Cast Iron
DVBGTKB – Ebony Black Enameled Cast Iron
The Georgian Bay is designed for use on fireplace mod-
els 36XDV (36”), DV360 (41”) and DVRT41 (41”).
NOTE: Cast iron parts can be heavy, an assistant
would be advisable for this installation.
CAUTION: Porcelain enamel is fragile. The finish can
be easily damaged if castings are not handled carefully.
Always place castings on a protective surface, such as
a towel, blanket or carpet.

Check Contents of Shipping Carton

Compare contents of carton in Figure 1 with actual
parts received. If any parts are missing, or damaged,
contact your local dealer before starting installation.
Contents: (Fig. 1) Top Dome Section, Main Body Sec-
tion, knob extensions (2), Top Heat Deflector, Screws (4)

Tools required: Phillips screwdriver, measuring tape

NOTE: It is our recommendation that you
install the Georgian Trim, if purchased, be-
fore you install the Georgian Bay. This will
help reduce damage to both cast units.
Fireplace Unit Preparation

Before you start your bay installation the fireplace unit
needs to have some items removed. (Fig. 2)
1. Remove the top louvre by gently sliding the louvre

upward and away from the unit.

2. Remove the sheet metal top flange located on the

bottom side of the top louvre opening. You will need
to remove between 2-5 Phillips screws that are hold-
ing the flange in place.

3. Remove the bottom louvre by removing 4 Phillips

screws or by pulling the hair pins that are holding the
hinge pins in place on the unit.

�����
�������������
�����

Top Flange

Top

Louvre

Bottom

Louvre

KT696

Fig. 2 Remove the fireplace top and bottom louvre and top
flange.

4. Install the top heat deflector shield by aligning the

holes of the shield with the four (4) inside holes on
the fireplace top flange. Use the four (4) screws sup-
plied to attach the shield to the unit. (Fig. 3)

This completes the fireplace unit preparation.

30003743 5/08 Rev. 1

������
���������������������
�����

Top Dome

Section

Main Body

Section

CAR191

Fig. 1 Carton contents.

Knob Extensions

Screws

Top Heat

Deflector

Advertising