Viper 5902 - Manual (Page 18)

Commands
15 © 2009 Directed Electronics. All rights reserved.
Silent Disarm
Press and release
The alarm disarms, doors unlock (if connected), and the lights flash
twice. The
SILENT DISARM
animation plays to confirm. The Alarm Trig-
ger report* may replace the Silent Disarm animation.
Runtime Reset
Press and release
If more time is needed while remote start is active, runtime reset
will reset the runtime counter to the pre-programmed setting. The
RUNTIME RESET
animation and tones play to confirm. The Remote
Start runtime is reset in the Status screen.
Note Remote Start must be active to use this feature.
* See Alarm Features for details.